Toyota Supra A91 on 19 inch D03-R Forged Wheels in Matte Black

The VR Forged Toyota Supra A90 | A91 fitment has been extremely successful for us. With a slew of 20 inch fitments instock, we also released a 19 inch fitment which is even more popular for track guys. Our customer Jesus recently sent us these photos of his beautiful white Toyota Supra featuring our 19 inch D03-R wheels in a satin black. This wheel setup is a 19×9.5 +22mm in the front and a 19×10.5 +35mm in the rear. These 1 piece forged monoblock wheels were designed specifically for the Toyota Supra. As a forged monoblock, these wheels are priced very well for a set of 4. These FORGED, not flow forged or cast. Forged wheels are extremely lightweight and strong!

Check out this wheel package here – https://www.vividracing.com/vr-forged-d03r-wheel-package-toyota-supra-mkv-19×95-19×105-matte-black-p-154632028.html

Customer IG https://www.instagram.com/landacet/

Photographer IG https://www.instagram.com/nk_pixs/

Lethal Performance Ford Bronco with VR Forged D14 Matte Black Wheels

0

It’s been 25 years since the last Bronco was made, but the newly redesigned legend is making quite a splash in the truck community and we are here for it! The aftermarket is booming with Bronco parts to take the off-road king to new heights, literally and figuratively; and nothing hits quite like a fresh set of wheels to give it a whole new attitude. We hooked our good friend Jared Rosen (IG: @lethaljared) of Lethal Performance up with a set of the new VR Forged D14s for his Ford Bronco, and the result is pure perfection. The wheels measure 17×8.5 +0mm all around with a 108 center bore and 6×139.7 bolt pattern. Each wheel weighs 10.6 kilograms (23.3 pounds) and boasts a load rating of up to 11 kilograms (2425 pounds)!

The VR Forged D14 wheels currently come in satin bronze and matte black, with additional options like gunmetal available for the Sport variant. Jared opted for the rugged matte black finish to match the skull and crossbones Lethal emblem on the Bronco. It also contrasts the unmistakable Ford Velocity Blue Metallic factory paint beautifully. To finish the look, these D14s are wrapped in BFGoodrich 37-inch tires with an ICON Vehicle Dynamics 3-inch spacer kit for the ultimate lift and off-road stance. The finished product is nothing short of amazing from the fitment to the motorsports styling and overall appeal. For a truck as capable as the Bronco, it’s important to choose a high-quality set of wheels that not only play the part but perform the part just the same.

The VR Forged D14 monoblock wheels spotlight an off-road-inspired design with a unique machined ring around the outer edge. The D14 series features a one-piece, high-strength construction with a simple but bold six-spoke pattern that pairs well with the aggressive nature of this resurrected icon. And for a beast like the Bronco, these wheels need to measure up to the challenge and be able to withstand the inevitable. With that, Vivid Racing has manufactured its forged wheels using a 10,000-ton press to ensure they can stand up to the test of time and prove incredibly resilient both on and off the road. After all, it’s safe to assume that nearly all Bronco owners, including Jared, are going to take their truck off the beaten path at least once.

Features:

All VR Forged wheels include center caps.
They are designed to work with most OEM TPMS sensors.
Some wheels may require aftermarket lug nuts or bolts.
Weights are estimated from engineering and scale tests.
Wheels are designed to work with OEM brakes and most big brake kits. Please provide BBK template if you have questions on fitment.
All wheels go through extensive testing to meet proper regulations. View Manufacturing Details Here.

Finish Options: Satin Bronze, Matte Black, Gunmetal

Note: Should you need a custom fitment or color, special orders can be done. However, pricing for these orders is not the same as for our “in stock” wheels. Contact Us Here.

BMW M3 G80 on VR Forged D05 in Hyper Black

0

The BMW G80 M3 is the latest iteration of the popular sports car in sedan form. It is a remarkably well-balanced machine (the Ultimate Driving Machine, if you will) that can produce some serious numbers at the track while maintaining a comfortable drive on a daily basis. With its dynamic new appearance, the G80 M3 certainly stands out among a sea of other M3s, yet still boasting that unmistakable BMW design and racing pedigree. With a new S58 turbocharged engine that can produce up to 503 horsepower and 476 pound-feet of torque, the G80 M3 will take you places – and in style! That is certainly the case for the owner of this stunning BMW G80 M3 (IG: @crooklynm3). Showcasing one of the most beautiful colors in the brand’s current lineup, this Brooklyn Grey Bimmer dominates the spotlight.

This customer was looking for a unique set of aftermarket wheels that would really accentuate the new-generation G80 M3’s body lines and aggressive look. They turned to us here at VR Forged for a set of our highly popular D05 forged wheels. The D05 is certainly a looker with its sleek branch-like spokes and overall motorsports-inspired design that feels right at home on the M3 sports sedan. The split-spoke design looks out of this world with intricate machine work and precision CNC-machined details all throughout. The D05 is also super lightweight with a one-piece forged monoblock construction made using a 10,000-ton press. This was done to ensure the highest levels of durability, especially with spirited driving and track days. VR Forged wheels deliver the ultimate when it comes to form and function to stand up to the elements and look good while doing so; this way, you can drive your vehicle the way it was meant to be driven.

The owner of this G80 M3 had a set of the 20-inch VR Forged D05 wheels installed by Parts Score performance shop (IG: @partsscore) in Scottsdale, Arizona. These 20-inch D05 wheels are wrapped in Michelin Pilot Sport 4S tires for the ultimate in fitment, grip, and performance. The D05s measure 20×10 +11 at the front and 20×11 +21 at the rear with a 66.5 center bore and 5×112 bolt pattern. The wheels are finished in VR Forged’s stunning hyper black finish which translates to a dark black/chrome color with a distinct metallic luster. And it pairs perfectly with the coveted Brooklyn Grey Metallic factory paint. For those looking to add a bit of flair to the G80 M3, you can never go wrong with a custom set of aftermarket wheels. The proof is in the photos!

Features:

All VR Forged wheels include center caps.
They are designed to work with most OEM TPMS sensors.
Some wheels may require aftermarket lug nuts or bolts.
Weights are estimated from engineering and scale tests.
Wheels are designed to work with OEM brakes and most big brake kits. Please provide BBK template if you have questions on fitment.
All wheels go through extensive testing to meet proper regulations. View Manufacturing Details Here.

Finish Options: Hyper Black

Note: Should you need a custom fitment or color, special orders can be done. However, pricing for these orders is not the same as for our “in stock” wheels. Contact Us Here.

Matte Black Corvette C6 with Hyper Black D05 VR Forged Wheels

0

The Corvette is currently in its eighth generation, but its predecessors are still going strong and are highly sought after. The C6 Corvette, produced from 2005 to 2013, was heavily updated from the previous C5 and remains a favorite among modern Corvette enthusiasts today, and for good reason. Appearance-wise, the C6 Corvette got new exposed, flushed headlights (goodbye pop-up lights) and a more angular, sharper body. It also was treated to upgraded suspension and handling along with a larger engine; the LS engine remained but was punched out to 6.0 liters. All in all, the C6 Corvette needs no introduction and certainly doesn’t need much when it comes to aesthetics. However, a new set of wheels can really accentuate the American icon’s natural DNA and make it stand out in a sea of ‘Vettes at your next show, cruise, or track day.

Our customer (IG: @thatcarbonvette) is the owner of a 2005 Corvette C6 with the Z51 package. The Z51 package includes a stiffer suspension, improved cooling, tires with better dry-road grip, bigger brakes, and a six-speed manual with shorter ratios. Think of the Z51 as a sport package that preps the car for hard driving and track use. This customer was looking for a set of wheels that would really provide a more distinct and aggressive aesthetic with OE-like handling and performance. With VR Forged, this C6 is ready for the track with wheels that not only look the part, but play it as well. We hooked this 2005 C6 up with a set of our VR Forged D05 monoblock forged wheels in a 19-inch staggered fitment. The wheels measure 19×9.5 at the front with a +30 offset and 19×10.5 at the rear with a +34 offset. The owner of this C6 installed a set of Anderson Composites carbon fiber fenders to help clear the wider stance in the front and the rear. The end result is just glorious.

The VR Forged D05 features a durable one-piece construction that was made using a 10,000-ton press for unmatched levels of strength. The D05 has an elegant design with sharp styling cues and intricate machine work for that race-inspired look. The split-spoke design towards the barrel keeps the eyes fixated on the precision CNC machining. It gives off that spider-like aesthetic that exudes a bold and intimidating energy well suited to the C6 Corvette. These D05 forged wheels are finished in a stunning Hyper Black color, which is somewhat of a darker chrome with a unique luster. It provides a beautiful contrast to the clean factory black paint on this C6 and looks good no matter the lighting. Just take a look at the stunning golden hour photos of this setup our customer sent in of his Z51 C6.

Features:

All VR Forged wheels include center caps.
They are designed to work with most OEM TPMS sensors.
Some wheels may require aftermarket lug nuts or bolts.
Weights are estimated from engineering and scale tests.
Wheels are designed to work with OEM brakes and most big brake kits. Please provide BBK template if you have questions on fitment.
All wheels go through extensive testing to meet proper regulations. View Manufacturing Details Here.

Finish Options: Brushed, Matte Black, Gloss Black, Hyper Black, Gunmetal, Satin Bronze

Note: Should you need a custom fitment or color, special orders can be done. However, pricing for these orders is not the same as for our “in stock” wheels. Contact Us Here.

Subaru Forester XT Lowered on VR Forged D03-R Hyper Black Wheels

0

Subaru introduced the 2.5-liter XT trim of the Forester in 2004, which turned into three generations of the popular turbocharged Forester XT. While the idea of a high-performance SUV is commonplace today, at the time it was not. Offering both a five-speed manual transmission and a four-speed automatic, the Subaru Forester XT was often seen as a stick-shift rocket that offered WRX STI-like power in a more practical SUV form. In 2018, however, the Japanese automaker decided to release one final model before axing the Subaru Forester XT from its lineup. While the turbocharged Forester XT may be gone, enthusiasts will hardly ever forget the sporty SUV and the amazing feeling it gave once you were actually behind the wheel. It delivered an aggressive punch while retaining that crossover SUV feel laced with the signature comfort associated with the Forester lineup. And if you’re the owner of one, like this customer is, you get to still enjoy that experience on the daily.

Our customer, Daidrian Urias (IG @daidrian_sairu) is the proud owner of a five-speed 2005 Crystal Gray Metallic Subaru Forester XT. The car is lowered on a set of Swift springs to get that ultimate sporty stance paired with unmatched handling and performance. He was in the market for a set of wheels that would really accentuate the XT’s natural DNA and look great with its new lowered look. Daidrian went with the VR Forged D03-R monoblock wheels in a custom 18-inch setup finished in our lustrous Hyper Black color. These D03-R wheels measure 18×9.5 all around with a +38mm offset and 5×100 bolt pattern. The fitment is flawless and the finish looks incredible especially in that unmatched sunset lighting (see photos below).

The VR Forged D03-R wheels are similar to the D03 in design but feature a motorsports-inspired ring to set them apart. The intricate details and sharp machine work near the center of the wheel draw you in, while the stunning outer ring maintains your gaze at every angle. It’s the perfect combination of a simple thin spoke design with an added flair that truly stands out among other wheel options on the market. Aside from looking the part, these wheels also play the part. They are manufactured using a 10,000-ton press to guarantee the highest levels of strength and reliability no matter the driving you do. All in all, the D03-R series is perfectly matched to any tuner-style vehicle and looks right at home on this customer’s ’05 Forester XT.

Features:

All VR Forged wheels include center caps.
They are designed to work with most OEM TPMS sensors.
Some wheels may require aftermarket lug nuts or bolts.
Weights are estimated from engineering and scale tests.
Wheels are designed to work with OEM brakes and most big brake kits. Please provide BBK template if you have questions on fitment.
All wheels go through extensive testing to meet proper regulations. View Manufacturing Details Here.

Note: Should you need a custom fitment or color, special orders can be done. Pricing for these orders, however, is not the same as pricing for our “in stock” wheels. Contact Us Here.

2022 Toyota Tundra on New VR Forged D07 Wheels with 35s

0

One word to describe the new Toyota Tundra is tough. The popular pick-up truck has been redesigned from the ground up and engineered for the ultimate adventure. It’s the most capable and advanced Tundra to date. Its fully boxed, high-strength steel-ladder frame provides enhanced rigidity and driving comfort, while the rear frame member is widened to improve stability and towing capability. This cutting-edge foundation makes the new Toyota Tundra the most durable body-on-frame hauler to come off the automaker’s Texas assembly line. Every inch of this truck has been engineered to deliver the highest levels of quality when it comes to aesthetics, aerodynamics, power, handling, and overall off-road prowess. And a truck as capable as the Tundra deserves a set of wheels that really accentuate its natural robust DNA. Enter the latest offering from the VR Forged lineup: the D07 monoblock wheel.

This 2022 Toyota Tundra sits on a set of 18×9 wheels with a +12mm offset and 6×139.7 bolt pattern. Each D07 wheel has an impressive load rating of up to 1000 kilograms (2204 pounds)! This customer chose a Satin Bronze finish, which contrasts well with the factory paint, to give it that desert-inspired look. The D07s are wrapped in beefy BFGoodrich Mud-Terrain T/A KM3 35X12.50R18 tires, which provide an aggressive off-road grip and added durability so you can really push the limits and drive the Tundra as it was intended. This truck has been lifted with Rough Country’s 3.5-inch lift kit to accommodate for the larger setup and level out that nose-down look from the factory. When you tie it all together, this Tundra is certainly a looker and more than capable of holding its own both on and off the road.

The VR Forged D07 one-piece wheels feature a high-strength monoblock construction that is lightweight compared to standard cast wheels. The D07s are manufactured using a 10,000-ton press to make sure they can stand up to the rigors of hard-driving and off-roading, so you can enjoy them for years to come no matter where you go! The VR Forged D07 wheel is perfectly mated to any off-road vehicle, especially the latest-gen Tundra, looking right at home while also standing out for that added flair. The D07 wheel spotlights a rugged, stout 6-spoke design with a CNC-machined ring around the outside edge. It’s a simple wheel with detailed elements that show you mean business. For those searching for an off-road wheel that checks all of the boxes, the VR Forged D07 is it.

Features:

All VR Forged wheels include center caps.
They are designed to work with most OEM TPMS sensors.
Some wheels may require aftermarket lug nuts or bolts.
Weights are estimated from engineering and scale tests.
Wheels are designed to work with OEM brakes and most big brake kits. Please provide BBK template if you have questions on fitment.
All wheels go through extensive testing to meet proper regulations. View Manufacturing Details Here.

Finish Options: Matte Black, Satin Bronze

Note: Should you need a custom fitment or color, special orders can be done. Pricing for these orders varies from the pricing for our “in stock” wheels. Contact Us Here.

Corvette C8 Track Car in Puerto Rico with VR Forged D01 Wheels

0

When it comes to the new Corvette C8, the domination is in the details and it’s evident that Chevrolet paid strict attention to every inch of this sports car from the inside out. The eighth-generation Corvette is both bold and breathtaking with sharp, potent aerodynamics that slice through the air with absolute precision. The C8 boasts an impressive pedigree and continues to steal the spotlight as a sports car purpose-built to take on any challenge, including other supercars. The naturally aspirated V8 engine is positioned behind the driver to put more power to the rear wheels where it matters most. Speaking of wheels, the stock wheels are quite sharp, but if you are really looking for some added customization, a fresh set of VR Forged wheels is the icing on the cake.

The beautiful Corvette C8 track car featured here is from JC Wheels (IG: @jc_wheels1) in Puerto Rico. The owner was looking to add some aggressive wheels to really up the ante on this build. They went with a set of the unique VR Forged D01 monoblock wheels in a staggered setup. The front wheels measure 20×9.5 +38mm 5×120 and the rear wheels are 21×12.5 +58mm 5×120. Recommended tire size is 255/30/20 and 325/25/21, respectively. These wheels weigh 11.4 kilograms (25.1 pounds) and 13.9 kilograms (30.6 pounds) with a 690-kilogram (1521-pound) load rating. This lightweight yet incredibly strong construction is made possible using a 10,000-ton press in the manufacturing stages.

The VR Forged D01 monoblock wheels deliver a truly unique aesthetic to the C8 Corvette with its bold branched-out styling. These wheels spotlight several V-shaped elements and intricate machine work near the center to really draw the eyes in. It’s an enthralling design that will certainly make this Corvette stand out in a sea of others at the owner’s next car show or track event. This customer went with a sleek matte black finish to accent the lustrous Ceramic Matrix Gray Metallic factory paint. With VR Forged, not only are you getting visually appealing pieces, but you’re also getting wheels that can stand up to the rigors of daily driving and spirited track days so you can enjoy your ride to the fullest and look great doing so. To purchase a set of VR Forged wheels for your Corvette C8, click here!

Features:

All VR Forged wheels include center caps.
They are designed to work with most OEM TPMS sensors.
Some wheels may require aftermarket lug nuts or bolts.
Weights are estimated from engineering and scale tests.
Wheels are designed to work with OEM brakes and most big brake kits. Please provide BBK template if you have questions on fitment.
All wheels go through extensive testing to meet proper regulations. View Manufacturing Details Here.

Finish Options: Brushed, Matte Black, Satin Bronze, Gloss Black

Note: Should you need a custom fitment or color, special orders can be done. Please note that pricing for these orders is not the same as pricing for our “in stock” wheels. Contact Us Here.

BMW M3 F80 Yas Marina Blue with Brushed D09 VR Forged Wheels

0

When it was first unveiled, the BMW F80 M3 surprised the consumer public with its four-door layout. As a result of the German marque rebranding its lineup, the M3 was now only available as a sedan and the outgoing M3 coupe was to be called the M4. The launch of the new F80 M3 sedan, at that time, revealed a new interpretation of the high-performance sports car and carried over the coveted BMW M philosophy into the fifth generation of the model. A harmonious blend of elements works together perfectly on the F80 M3 to deliver outstanding performance, precision, and agility. These come in the form of a sharper design with enhanced dynamics, countless aerodynamic features, and a newly developed lightweight chassis that bring motorsport technology from the track to the road making this powerful everyday cruiser a true joy to drive.

The F80 M3 leaves the factory on low-weight 18-inch 513M forged wheels that are specially developed to make a significant contribution to the reduction in its unsprung mass. However, the standard 18-inch wheels won’t clear the optional M carbon-ceramic brakes, which require the optional 19-inch 437M wheels. While the optional wheels are a bit more attractive than the standard fittings, they still lack a bit if you really want your BMW to stand out. Among a sea of Bimmers, the best way to set your ride apart from the rest is with a set of VR Forged’s highly sought-after D09 one-piece wheels. The D09 wheel boasts a lightweight monoblock construction that is made using a 10,000-ton press to ensure the highest levels of strength and reliability.

The stunning Yas Marina BMW F80 M3 featured here (IG: @i_be_danny) was treated to the 20-inch D09 wheel package from VR Forged. They measure 20×9.5 +20 at the front and 20×11 +37 at the rear with a recommended tire size of 265/30/20 and 295/30/20, respectively. The D09 series wheel showcases a very traditional mesh motorsports style perfectly suited to the luxury sports sedan. The strategic split Y-spoke design also features lightweight pockets and machining to deliver the ultimate in aesthetics, handling, and durability. The owner of this Yas Marine F80 M3, Danny A., chose a brushed finish for that classic contrast that never goes out of style. Other available color options include a stunning Gloss White, Satin Bronze, and Matte Black finish – all of which would still look incredible on this blue beauty.

Features:

All VR Forged wheels include center caps.
They are designed to work with most OEM TPMS sensors.
Some wheels may require aftermarket lug nuts or bolts.
Weights are estimated from engineering and scale tests.
Wheels are designed to work with OEM brakes and most big brake kits. Please provide BBK template if you have questions on fitment.
All wheels go through extensive testing to meet proper regulations. View Manufacturing Details Here.

Finish Options: Satin Bronze, Brushed, Matte Black, Gloss White

Note: Should you need a custom fitment or color, special orders can be done. Pricing for these orders, however, is not the same as pricing for our “in stock” wheels. Contact Us Here.

Red Mist Metallic Corvette C8 with Bronze D01 VR Forged Wheels

0

While you may not find someone cross-shopping a C8 Corvette with, let’s say, a Lamborghini Huracan, it’s certainly impressive to see how the American icon stacks up to its much more expensive competition. The C8 is not actually a supercar, it’s a sports car; but it did earn a reputation as being a “supercar killer”. That’s because the mid-engine beauty (and beast) is capable of holding its own against the higher-priced exotics out there. What’s more, the aftermarket offers a plethora of upgrades, both aesthetically and performance-wise, to really take the C8 up a few notches. If you are looking to enhance the looks of your C8 Corvette and customize it to more to your taste, a set of high-quality aftermarket forged wheels is a great way to start.

With VR Forged wheels, not only will your “super sports car” get a newfound attitude, but it will also handle exceptionally well without affecting its drivability. The stunning Red Mist Metallic C8 featured here is shown wearing a set of the VR Forged D01 monoblock wheels. This customer opted for 20×9.5 +38 wheels at the front and 21×12.5 +58 wheels at the rear. Recommended tire size for this setup is 255/30/20 and 325/25/21, respectively. The front wheels weigh just 11.4 kilograms (25.1 pounds) and the back wheels weigh 13.9 kilograms (30.6 pounds). Each D01 wheel on this C8 has a 5×120 bolt pattern, 67.1 center bore, and up to a 690-kilogram (1521-pound) load rating. It’s also important to note that these lightweight wheels stand up incredibly well to hard-driving and were manufactured using a 10,000-ton press for the ultimate strength.

This customer chose a set of the VR Forged D01 monoblock wheels in a satin bronze finish. The golden hue pairs really well with the lustrous factory Red Mist Metallic paint job for that perfect amount of contrast. After all, it’s a known fact that bronze and deep reds work look really great together. In addition to the impeccable color matching, these D01s truly enhance the overall look and stance of this C8 with a very unique aesthetic. That’s because the VR Forged D01 one-piece wheels incorporate several V-shaped elements and intricate machine work near the center to really draw you in. It’s a captivating design that will make this C8 Corvette stand out among others like it at its next cruise, rally, or show. To purchase this exact D01 setup for your ‘Vette, click here!

Features:

All VR Forged wheels include center caps.
They are designed to work with most OEM TPMS sensors.
Some wheels may require aftermarket lug nuts or bolts.
Weights are estimated from engineering and scale tests.
Wheels are designed to work with OEM brakes and most big brake kits. Please provide BBK template if you have questions on fitment.
All wheels go through extensive testing to meet proper regulations. View Manufacturing Details Here.

Finish Options: Brushed, Matte Black, Satin Bronze, Gloss Black

Note: Should you need a custom fitment or color, special orders can be done. Please note that pricing for these orders is not the same as pricing for our “in stock” wheels. Contact Us Here.

VR Forged D12 Satin Black Wheels on Silver Porsche 991 GT3

0

The Porsche 991 GT3 needs no introduction, what with its motorsports-inspired design, impeccable performance, and tantalizing soundtrack with the power to boot. Each and every inch of the car was carefully thought out to deliver optimal handling, functional aerodynamics, and that head-turning sports car aesthetic. While it may seem like the Porsche 991 GT3 has got everything, it can always use some mods to further enhance its natural DNA whether it be on the outside, inside, or right at the heart of it. In the case of the stunning silver 991 GT3 featured here, this owner wanted to give their Porsche some added oomph with a set of aftermarket forged wheels.

This customer chose a set of the highly popular D12 forged monoblock wheels from VR Forged. While they may appear simple or minimalistic in design, these wheels boast a timeless and sporty aesthetic that looks great on a wide range of vehicles. The show-stopping wide five-spoke pattern ties together to give that beefy and aggressive starlike design that is so highly sought after by enthusiasts. Not only do the VR Forged D12 wheels look incredible on the Porsche 991 GT3, but they also handle exceptionally well thanks to their ultra-strong one-piece construction. The D12 forged wheels are manufactured using a 10,000-ton press to ensure that they can stand up to the elements of both daily driving and more spirited driving too – something the GT3 was built to do.

Parts Score of Scottsdale, Arizona did the installation on this customer’s Porsche 991 GT3 and the final result is perfection. The front wheels are 20×9 +45 with a recommended tire size of 245/35/20 and the back wheels measure 20×12 +45 with a recommended tire size of 305/30/20. The centerlock forged wheels are finished in a stunning satin black finish which compliments the silver factory paint beautifully. Altogether, the precise fitment and late ’90s motorsports feel of these Euro five-spoke D12s are a match made in heaven on this GT3. It just goes to prove how a proper set of aftermarket wheels can turn even a highly coveted sports car into a much more personalized work of art.

Features:

All VR Forged wheels include center caps.
They are designed to work with most OEM TPMS sensors.
Some wheels may require aftermarket lug nuts or bolts.
Weights are estimated from engineering and scale tests.
Wheels are designed to work with OEM brakes and most big brake kits. Please provide BBK template if you have questions on fitment.
All wheels go through extensive testing to meet proper regulations. View Manufacturing Details Here.

Finish Options: Satin Black, Silver

Note: Should you need a custom fitment or color, special orders can be done. However, pricing for these orders is not the same as for our “in stock” wheels. Contact Us Here.