2022 Ford Raptor Black on Black with VR Forged D14 17inch Wheels

Best suited for offroad adventures, the 2022 Ford Raptor is an incredible pickup truck that was built to endure the most of what you will put it through. To do that, you need wheels as incredibly strong, and high performing as your vehicle and the VR Forged D14 wheels fit the bill perfectly. The photos below feature a black Ford Raptor with Black VR Forged wheels, however, they are also available in Gunmetal, Satin Bronze, and Matte Black finish. The VR Forged D14 is a full 1pc forged monoblock wheel specifically designed for offroad purposes. It features a unique machined ring around the outer edge, and the 6-spoke design brings a rugged look to the wheels. This wheel is a perfect match for the 2022 Ford Raptor and any off-road vehicle as it is manufactured using a 10,000-ton press, so it is incredibly strong and can endure rough terrain.

Click Here to Buy VR Forged D14 Wheels for Your 2022 Ford Raptor Now

If you have any questions about VR Forged Wheels or if you need new wheels for your 2022 Ford Raptor, please do not hesitate to contact us. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com.

The post 2022 Ford Raptor Black on Black with VR Forged D14 17inch Wheels appeared first on Vivid Racing News.

Ford Raptor 2022 Outfitted with VR Forged D14 17 inch Wheels

0

Ford Raptor 2022 is packed with new features designed to make it better equipped for off-road adventures. The Raptor 2022 has a powerful 3.5-liter V6 engine that is capable of producing more than 450 horsepower. Being one of the most popular off-road vehicles on the market, pairing it with the best wheels fit for the job is the upgrade you can do for your vehicle. We recently outfitted a client’s white 2022 Ford Raptor with VR-forged D14 17-inch wheels. Even though the pickup truck in the photos below is paired with wheels in a Satin Bronze finish, these wheels are also available in a Matte Black finish. The front and rear wheels are both 17×8.5 -1mm 6×135, and they provide a superior driving experience, allowing drivers to feel as if they are in the moment of the action. The VR Forged D14 is a full 1pc forged monoblock wheel specifically designed for off-road adventures, and it fits the Ford Raptor and any off-road vehicle.

Click Here to Buy the VR Forged D14 Wheels for Your Ford Raptor 2022

If you have any questions about VR Forged Wheels or if you need new wheels for your Ford Raptor 2022, please do not hesitate to contact us. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com.

The post Ford Raptor 2022 Outfitted with VR Forged D14 17 inch Wheels appeared first on Vivid Racing News.

Tesla Plaid with VR Forged 21 inch Wheels in White

0

Introduced in 2021, Tesla Model S Plaid is a unique, eye-catching electric car known for its quickest acceleration and impressive interior features. The Tesla plaid car is also impressive when it comes to power, as it is designed with an 85kWh battery that is able to travel up to 350 miles on a single charge. The car’s exterior is made from a durable fabric with a subtle plaid pattern which matches perfectly with the white VR Forged wheels. If you’re looking for a stylish way to add some bling to your ride, then you need to check out the VR Forged 21-inch Wheels for Tesla Plaid. Our client Donald Bohrisch had his wheels custom done in white with his name engraved, and the wheels were mounted and balanced by our friends, Wheel Specialists, Inc. The VR Forged construction means that these wheels are strong and durable as they are manufactured using a 10,000-ton press. The custom white finish on these wheels definitely makes a statement on our client’s Tesla Plaid, but the wheel is also available now in a Gloss Black finish. For just $3,260, you can get this full 1pc forged monoblock wheel with a very motorsports-inspired ring. If you’re in the market for a custom set such as these, you may start your custom order process HERE. This visually stunning and stylish wheel is perfectly matched to any tuner-style vehicle, and the front wheels are 21×9.5 +35mm 5×120 and the rear wheels are 21×10.5 +40mm 5×120. These 21-inch VR Forged wheels weigh 12.6 kilograms, and they boast a load rating of 750 kilograms, so they can handle plenty of weight and terrain. The wheel’s lug style is conical, which is perfect for those who love a sleek finish.

Click Here to Buy VR Forged 21-inch Wheel for Your Tesla Plaid

If you have any questions about VR Forged Wheels or you need new wheels for your Tesla Model S Plaid, please do not hesitate to contact us. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com. The post Tesla Plaid with VR Forged 21 inch Wheels in White appeared first on Vivid Racing News.

Purple Camaro ZL1 with VR Forged D05 Gloss Black 20 Inch Wheels

0

The Chevrolet Camaro ZL1 is a modern take on an American classic. With all of the new-age technology, while still featuring a 6.2L Supercharged V8, this bow tie is a loose bat out of hell. A purple bat out of hell in this case. Sitting before us is clean, 2018 Camaro ZL1 that is laying down some serious power, 650HP to be exact; while maintaining some well-established style points. The D05 is a perfect match for big-body cars all the way to supercars cars with it’s split-spoke design that maintains a race-inspired aesthetic. We opted for the Gloss Black finish for a clean and smart look on the vibrant bow tie. This wheel package is a staggard set with performance and design being king. Up front is a 20×10 with a +24mm offset weighing in at 11.2lbs. Out back is a wide 20×11 with a +38mm offset, weighing in at 11.5lbs. The D05s are forged from a full 1-piece monoblock with a 10,000lbs press making these wheels lightweight and incredibly strong.

Shop VR Forged D05

VR Forged D05 wheels come in many fit and finish options for a wide array of makes and models from Porsche, Mclaren, BMW, Mercedes, Audi, Chevy Cameros, and Dodge Challengers.

It’s Sunni with this Miami Blue BMW M2 and VR Forged D04 Wheels – Video Inside

0

The BMW M2 is a track-inspired daily driver that has a knack for class but has the ability to cut loose at any given opportunity. Anyone who’s had the chance to hoon the M2 can testify to it’s well-balanced fun factor. @sunni.drivez does just that. Regularly tracking and pushing her M2 to the limits is her M.O. Sunni’s 2017 2-Series is modified with a 4″ Catless Down Pipe, high-flow intake, charge pipe, aftermarket intercooler, and a Bootmod3 Tune. She’s currently running a Stage 2 – 91 octane map drumming up 473HP! Did we mention she also originally wrapped her car herself?! Once Midnight Purple and now Miami Blue; not just any average wheelset is going to fit the bill for this build. We knew the D04 in Hyper Black would be sure to compliment this car with the current wrap and any other color she may decide to do in the future.

Shop VR Forged D04 in Hyper Black

The VR Forged D04 wheelset on @sunni.drivez M2 is a split, 5-spoke design with an aggressive 19 x 9.5 up front with a staggard 19 x 10 out back. These wheels are elegant but also give a performance-inspired stance. Forged from a 1-piece monoblock using a 10,000lbs press, these wheels are remarkably strong and lightweight. The front wheel weighs in at 10.5lbs and has an offset of +27mm; while the rear wheel comes in at 11.1lbs with an offset of +44mm. Perfect for the BMW M2 on a stock or lowered ride height. The VR Forged D04s are available in many different finishes and fitments that pair nicely on a wide range of makes and models.

SHOP VR Forged D04

Check out some glamor shots of the 2017 BMW M2 equipped with Hyper Black D04 and be sure to follow Sunni on Instagram and TikTok for more content on her M2 and future cars.

Owner @Sunni.Drivez

Tesla Model X Plaid with Inozetek Wrap on D04T 22 Inch VR Forged Wheels

0

Check out these custom made VR Forged 1pc Monoblock wheels for a customers Tesla Model X Plaid. These are the D04T which is a variant of our D04 wheels with a twist! The wheels are all Gloss Black and feature engraved logos and a machined VR logo center cap. The front wheels are a 22×9.5 +30mm and the rear wheels are a 22×10.5 +30mm. The wheels have been wrapped in 275/35/22 up front and 295/35/22 in the rear. The most stunning part is the full Inozetek wrap in a color called Celestial Unicorn. Owned by our friends at OZBraz here in Arizona, it is a definitely piece of artwork. Build your custom VR Forged D04T Wheels Here https://www.vividracing.com/index.php?keywords=vr+forged+d04T+custom Follow them on Instagram at https://www.instagram.com/ozbraz/

Toyota Supra A91 on 19 inch D03-R Forged Wheels in Matte Black

0

The VR Forged Toyota Supra A90 | A91 fitment has been extremely successful for us. With a slew of 20 inch fitments instock, we also released a 19 inch fitment which is even more popular for track guys. Our customer Jesus recently sent us these photos of his beautiful white Toyota Supra featuring our 19 inch D03-R wheels in a satin black. This wheel setup is a 19×9.5 +22mm in the front and a 19×10.5 +35mm in the rear. These 1 piece forged monoblock wheels were designed specifically for the Toyota Supra. As a forged monoblock, these wheels are priced very well for a set of 4. These FORGED, not flow forged or cast. Forged wheels are extremely lightweight and strong!

Check out this wheel package here – https://www.vividracing.com/vr-forged-d03r-wheel-package-toyota-supra-mkv-19×95-19×105-matte-black-p-154632028.html

Customer IG https://www.instagram.com/landacet/

Photographer IG https://www.instagram.com/nk_pixs/

Lethal Performance Ford Bronco with VR Forged D14 Matte Black Wheels

0

It’s been 25 years since the last Bronco was made, but the newly redesigned legend is making quite a splash in the truck community and we are here for it! The aftermarket is booming with Bronco parts to take the off-road king to new heights, literally and figuratively; and nothing hits quite like a fresh set of wheels to give it a whole new attitude. We hooked our good friend Jared Rosen (IG: @lethaljared) of Lethal Performance up with a set of the new VR Forged D14s for his Ford Bronco, and the result is pure perfection. The wheels measure 17×8.5 +0mm all around with a 108 center bore and 6×139.7 bolt pattern. Each wheel weighs 10.6 kilograms (23.3 pounds) and boasts a load rating of up to 11 kilograms (2425 pounds)!

The VR Forged D14 wheels currently come in satin bronze and matte black, with additional options like gunmetal available for the Sport variant. Jared opted for the rugged matte black finish to match the skull and crossbones Lethal emblem on the Bronco. It also contrasts the unmistakable Ford Velocity Blue Metallic factory paint beautifully. To finish the look, these D14s are wrapped in BFGoodrich 37-inch tires with an ICON Vehicle Dynamics 3-inch spacer kit for the ultimate lift and off-road stance. The finished product is nothing short of amazing from the fitment to the motorsports styling and overall appeal. For a truck as capable as the Bronco, it’s important to choose a high-quality set of wheels that not only play the part but perform the part just the same.

The VR Forged D14 monoblock wheels spotlight an off-road-inspired design with a unique machined ring around the outer edge. The D14 series features a one-piece, high-strength construction with a simple but bold six-spoke pattern that pairs well with the aggressive nature of this resurrected icon. And for a beast like the Bronco, these wheels need to measure up to the challenge and be able to withstand the inevitable. With that, Vivid Racing has manufactured its forged wheels using a 10,000-ton press to ensure they can stand up to the test of time and prove incredibly resilient both on and off the road. After all, it’s safe to assume that nearly all Bronco owners, including Jared, are going to take their truck off the beaten path at least once.

Features:

All VR Forged wheels include center caps.
They are designed to work with most OEM TPMS sensors.
Some wheels may require aftermarket lug nuts or bolts.
Weights are estimated from engineering and scale tests.
Wheels are designed to work with OEM brakes and most big brake kits. Please provide BBK template if you have questions on fitment.
All wheels go through extensive testing to meet proper regulations. View Manufacturing Details Here.

Finish Options: Satin Bronze, Matte Black, Gunmetal

Note: Should you need a custom fitment or color, special orders can be done. However, pricing for these orders is not the same as for our “in stock” wheels. Contact Us Here.

BMW M3 G80 on VR Forged D05 in Hyper Black

0

The BMW G80 M3 is the latest iteration of the popular sports car in sedan form. It is a remarkably well-balanced machine (the Ultimate Driving Machine, if you will) that can produce some serious numbers at the track while maintaining a comfortable drive on a daily basis. With its dynamic new appearance, the G80 M3 certainly stands out among a sea of other M3s, yet still boasting that unmistakable BMW design and racing pedigree. With a new S58 turbocharged engine that can produce up to 503 horsepower and 476 pound-feet of torque, the G80 M3 will take you places – and in style! That is certainly the case for the owner of this stunning BMW G80 M3 (IG: @crooklynm3). Showcasing one of the most beautiful colors in the brand’s current lineup, this Brooklyn Grey Bimmer dominates the spotlight.

This customer was looking for a unique set of aftermarket wheels that would really accentuate the new-generation G80 M3’s body lines and aggressive look. They turned to us here at VR Forged for a set of our highly popular D05 forged wheels. The D05 is certainly a looker with its sleek branch-like spokes and overall motorsports-inspired design that feels right at home on the M3 sports sedan. The split-spoke design looks out of this world with intricate machine work and precision CNC-machined details all throughout. The D05 is also super lightweight with a one-piece forged monoblock construction made using a 10,000-ton press. This was done to ensure the highest levels of durability, especially with spirited driving and track days. VR Forged wheels deliver the ultimate when it comes to form and function to stand up to the elements and look good while doing so; this way, you can drive your vehicle the way it was meant to be driven.

The owner of this G80 M3 had a set of the 20-inch VR Forged D05 wheels installed by Parts Score performance shop (IG: @partsscore) in Scottsdale, Arizona. These 20-inch D05 wheels are wrapped in Michelin Pilot Sport 4S tires for the ultimate in fitment, grip, and performance. The D05s measure 20×10 +11 at the front and 20×11 +21 at the rear with a 66.5 center bore and 5×112 bolt pattern. The wheels are finished in VR Forged’s stunning hyper black finish which translates to a dark black/chrome color with a distinct metallic luster. And it pairs perfectly with the coveted Brooklyn Grey Metallic factory paint. For those looking to add a bit of flair to the G80 M3, you can never go wrong with a custom set of aftermarket wheels. The proof is in the photos!

Features:

All VR Forged wheels include center caps.
They are designed to work with most OEM TPMS sensors.
Some wheels may require aftermarket lug nuts or bolts.
Weights are estimated from engineering and scale tests.
Wheels are designed to work with OEM brakes and most big brake kits. Please provide BBK template if you have questions on fitment.
All wheels go through extensive testing to meet proper regulations. View Manufacturing Details Here.

Finish Options: Hyper Black

Note: Should you need a custom fitment or color, special orders can be done. However, pricing for these orders is not the same as for our “in stock” wheels. Contact Us Here.

Matte Black Corvette C6 with Hyper Black D05 VR Forged Wheels

0

The Corvette is currently in its eighth generation, but its predecessors are still going strong and are highly sought after. The C6 Corvette, produced from 2005 to 2013, was heavily updated from the previous C5 and remains a favorite among modern Corvette enthusiasts today, and for good reason. Appearance-wise, the C6 Corvette got new exposed, flushed headlights (goodbye pop-up lights) and a more angular, sharper body. It also was treated to upgraded suspension and handling along with a larger engine; the LS engine remained but was punched out to 6.0 liters. All in all, the C6 Corvette needs no introduction and certainly doesn’t need much when it comes to aesthetics. However, a new set of wheels can really accentuate the American icon’s natural DNA and make it stand out in a sea of ‘Vettes at your next show, cruise, or track day.

Our customer (IG: @thatcarbonvette) is the owner of a 2005 Corvette C6 with the Z51 package. The Z51 package includes a stiffer suspension, improved cooling, tires with better dry-road grip, bigger brakes, and a six-speed manual with shorter ratios. Think of the Z51 as a sport package that preps the car for hard driving and track use. This customer was looking for a set of wheels that would really provide a more distinct and aggressive aesthetic with OE-like handling and performance. With VR Forged, this C6 is ready for the track with wheels that not only look the part, but play it as well. We hooked this 2005 C6 up with a set of our VR Forged D05 monoblock forged wheels in a 19-inch staggered fitment. The wheels measure 19×9.5 at the front with a +30 offset and 19×10.5 at the rear with a +34 offset. The owner of this C6 installed a set of Anderson Composites carbon fiber fenders to help clear the wider stance in the front and the rear. The end result is just glorious.

The VR Forged D05 features a durable one-piece construction that was made using a 10,000-ton press for unmatched levels of strength. The D05 has an elegant design with sharp styling cues and intricate machine work for that race-inspired look. The split-spoke design towards the barrel keeps the eyes fixated on the precision CNC machining. It gives off that spider-like aesthetic that exudes a bold and intimidating energy well suited to the C6 Corvette. These D05 forged wheels are finished in a stunning Hyper Black color, which is somewhat of a darker chrome with a unique luster. It provides a beautiful contrast to the clean factory black paint on this C6 and looks good no matter the lighting. Just take a look at the stunning golden hour photos of this setup our customer sent in of his Z51 C6.

Features:

All VR Forged wheels include center caps.
They are designed to work with most OEM TPMS sensors.
Some wheels may require aftermarket lug nuts or bolts.
Weights are estimated from engineering and scale tests.
Wheels are designed to work with OEM brakes and most big brake kits. Please provide BBK template if you have questions on fitment.
All wheels go through extensive testing to meet proper regulations. View Manufacturing Details Here.

Finish Options: Brushed, Matte Black, Gloss Black, Hyper Black, Gunmetal, Satin Bronze

Note: Should you need a custom fitment or color, special orders can be done. However, pricing for these orders is not the same as for our “in stock” wheels. Contact Us Here.